Helpful Tips On Hanging Sheetrock

Hanging sheetrock is a construction site job that needs to be carried out properly to ensure that the resulting wall doesn't have any aesthetic or structural flaws. The following are six helpful tips that builders can use to get the job done without any mishaps:

Remove hardware from studs and joists

If nails or screws are left in studs and ceiling joists before sheetrock is hung, they can interfere with the new nails and screws that will be used to hold the sheetrock in place. Exposed studs and joists need to be carefully inspected for any flaws or debris that could cause problems. 

Use nails to tack and screws to fasten

Sheetrock can be tacked into place around the edges using ring-shank nails. This makes it easier to fasten the sheetrock in place afterwards with screws. Tacking first with nails will speed up the job and save builders from having to hold up the drywall while operating a screw gun. 

Use a drill bit specifically designed for sheetrock

Fastening sheetrock to joists and studs with a screw gun can be a delicate task. Using a drill bit that's specifically designed for the task can make it easier to get the screws sufficiently mudded without tearing too deeply into the drywall. 

Apply glue to studs

For extra strength, glue can be used in addition to nails and screws to attach sheetrock to studs. Putting a line of glue onto the studs along the perimeter of the sheetrock right before hanging is a quick and easy way to achieve a stronger bond. 

Do the ceiling first

The hardest part of a sheetrock job is hanging the ceiling. Lifting sheetrock up to the ceiling is especially difficult if the job must be done without a mechanical lifter. Getting this part of the job out of the way first can help make the task more manageable.  

Re-mud the next day

Mudding is important after the drywall is hung to smooth over the joints between separate sheets of drywall. Mudding a second time the day after drywall is hung can help ensure a seamless look and smooth out any dimples.

Take care of your mudding tools

Properly maintaining your mudding tools is an important part of achieving a professional-looking job. If tools are not properly cleaned after mudding, dried mud could cause streaks in walls when the tools are used again. Carefully clean mudding tools before mud has the time to dry in place and permanently damage your equipment. Contact a company like N.Z. Cramer & Son Inc | Building Supplies for more information.


Share